Che Wan Noorakma
-
Profil
Nama : Che Wan Noorakma binti Abdullah
Email :
Jawatan : Pensyarah Universiti
B.Eng. (Hons) Metallurgical Engineering (UniMAP)
MSc (Materials Engineering), USM
-
Geran
Tajuk Penyelidikan |
Nama Geran |
Tahun |
Design and fabrication of
MEMS High Sensitive
Capacitive Pressure Sensor
Based on CMOS Process
|
PRPUM |
2016 |
Fundamental Studies Of
Micro-Electro-Mechanical
Systems (MEMS)
Accelerometer Structure
Process
|
RAGS,KPT |
2015 |
Parameter Optimization
for Machining Carbon
Fiber Hand Lay Up
Composite
|
UniSZA |
2015 |
-
Penerbitan
Norliana Yusof, N. Soin. , Abdullah C.W. Noorakma , N. Soin. 2017. Effect of beams structures on dynamic behavior of piezoresistive Accelerometer Sensor, Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (1-4): 77- 81.
|
Musliha Ali, Abdullah C.W. Noorakma, Norliana Yusof, Abdullah, analysis of MEMS High Sensitive Capacitive Pressure Sensor, Journal of Engineering and Applied Sciences, 11 (12):2688-2692.
|
Musliha Ali, Abdullah C.W. Noorakma, Norliana Yusof, Abdullah, W.N.F Mohammad, N.Soin, S.F Wan Muhamad Hatta. 2016. Optimization of intraocular capacitive pressure sensor, IEEE International Conference Semiconductors Electronics, 173-176.
|
Norliana Yusof, Abdullah C.W. Noorakma , N. Soin. 2016. Simulation study of convex corner undercutting in KOH and TMAH for a MEMS Piezoresistive Accelerometer, Jurnal Teknologi 70(6): 69-76.
|
Norliana Yusof, Abdullah C.W. Noorakma , N. Soin. 2014. Corner Compensation Mask Design on MEMS accelerometer structure, IEEE International Conference Semiconductors Electronics, 248-251.
|
Abdullah C.W. Noorakma, Hussain Zuhailawati, V. Aishvarya, B.K. Dhindaw. 2013. Hydroxyapatite coated Magnesium based biodegradable alloy: Cold Spray Deposition and Simulated body fluid studies , Journal of Materials Engineering and Performance, 22(10): 2997-3004.
|
-
Penyeliaan
Tajuk |
Nama |
Peringkat |
Tahun |
Design and fabrication of
MEMS High Sensitive
Capacitive Pressure Sensor
Based on CMOS Process
|
Muslihah binti Ali |
Master |
2016 |
-
Kepakaran
-
Pengalaman
Tempat |
Jawatan |
Spansion (Penang) Sdn Bhd
Spansion (Penang) Sdn. Bhd. (613545-T) Phase II, Free Industrial Zone Bayan Lepas, 11900 Penang Malaysia
|
Jurutera Proses |
Western Digital Media (M’sia) Sdn
Phase IV Batu Maung
11950 Bayan Lepas
Penang
|
Jurutera Proses |
Faculty of Innovative Design and Technology
Universiti Sultan Zainal Abidin
Gong Badak Campus
Gong Badak
21300 Kuala Terengganu
|
Felo Akademik |
-
Pengajaran
Kod |
Program |
MTP 35103 |
ISM Teknologi Pembuatan |
MTP 23103 |
ISM Teknologi Pembuatan |
MTP 24103 |
ISM Teknologi Pembuatan |
MTM 12603 |
Diploma Teknologi Pembuatan |
-
Anugerah
-
Perundingan
Cetak
E-mel